SKU: 675609
TIMCO Bolt Down Fence Post Shoe - Bolt Secure - 100 x 100mm - Galvanised
4.3
(17)
364 in stock
Quick and easy way to erect fencing and posts - no digging or concreting required
Select Size (mm)
Select Finish
About this product
- Quick and easy way to erect fencing and posts - no digging or concreting required
- Designed to be fitted to an existing hard base
- Hot dipped galvanised for maximum rust protection, can also be painted over
- Ideal for patio fencing, decking, pergolas or car ports
- Bolt secure system clamps the post base firmly into the holder and allows for easy post adjustment or removal at a later stage
- Holds post base above ground level to prevent rot and decay
- Fixing plate bolt hole size: M10
About this product
- Quick and easy way to erect fencing and posts - no digging or concreting required
- Designed to be fitted to an existing hard base
- Hot dipped galvanised for maximum rust protection, can also be painted over
- Ideal for patio fencing, decking, pergolas or car ports
- Bolt secure system clamps the post base firmly into the holder and allows for easy post adjustment or removal at a later stage
- Holds post base above ground level to prevent rot and decay
- Fixing plate bolt hole size: M10
Specification & Documentation
Option
Bolt Secure
Pack Quantity
1
Type
Bolt Down
Finish
Hot Dipped Galvanised
Material
Carbon Steel
Size (mm)
100 x 100
Documents
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
MrMac296 - 4 years ago
If the shoe fits………..
The product itself is well made, robust and would probably serve its purpose extremely well but for the fact that I just cannot seem to source 100mm x 100mm posts anywhere locally. Everywhere I tried has the metric equivalent which works out at 95mm x95mm and creates a small gap all round the inside of the post shoe which requires packing out to insure a tight fit. It is for this reason I have only awarded 4 stars.
Was this review helpful?
Verified customer
Stuart Murtha - 4 years ago
Slightly disappointed
M10 bolts don't fit through the holes as stated in the specs,had to use M8 instead.Contacted the supplier but had no reply still. Disappointed the thickness of the shoe itself wasn't thicker to create a much more stable end result, luckily one side is adjoining a block wall otherwise i wouldn't have used them.
Was this review helpful?
Verified customer
Mr Griff - 5 years ago
Perfect
Brilliant quality and price. Looks great and don’t stand out like the others that rust, worth paying a little more for galvanised and less work in the long run
Was this review helpful?
Verified customer
Tom P uk - 5 years ago
OK for the price, but could be better made
Bought for a pergola I'm making and glad that I already decided to spray these as they were very rough. Lots of spitting all over from the sub par welding. They will hold, but the welds are quite poor. Had to grind them down, re galvanize and finish spray these. The bolts supplied looked quite old (lock nut nylons were corroded - again, was going to replace these anyway) Pictures below show the product before and after finishing. Lot of work with many stages, but worth the time and effort. (Silver hot dipped is starting point, yellow is intermediate primer stage (after galvanizing) and grey / blue is finish stage)
Was this review helpful?
Verified customer
SteveQ - 5 years ago
Great Quality
Exactly as described and what I was looking for. Solid strong and easy to fit. Durability is key as they will have to last so quality all important
Was this review helpful?
Verified customer
Page 1 of 3
Questions
Michaellll - 5 years ago
Category Manager
Hello, The fixing plate bolt hole size is M11 Thank you
Was this question helpful?
Page 1 of 1