SKU: 554604
Base Plate for Wooden Post - Suit 70-90mm Post - Hot Dip Galvanised
4.7
(41)
34 in stock
Fence post base plate for secure fixing to all floor surfaces
About this product
- Fence post base plate for secure fixing to all floor surfaces
- Quick installation
- Hot dip galvanised finish for superior corrosion resistance
About this product
- Fence post base plate for secure fixing to all floor surfaces
- Quick installation
- Hot dip galvanised finish for superior corrosion resistance
Specification & Documentation
Dual Coated
Yes
Finish
Hot Dipped Galvanised
Material
Mild Steel
Size (mm)
75 - 90
Type
Base Plate
Pack Quantity
1
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
AliP - 2 years ago
Design changed!
Design changed, now need to drill a 32mm hole, 90mm long in bottom of post to get these to fit.
Was this review helpful?
Verified customer
AKR DIY - 4 years ago
Secure post fixing
Very solid base plate. Need to drill/chisel 32mm hole in centre of post. Fixing screws supplied are fine on a 90mm post but too big for anything smaller as too close to edge of wood. For smaller posts drill pilot hole and use smaller screws to avoid splitting wood.
Was this review helpful?
Verified customer
David80 - 4 years ago
Excellent service
Excellent product Speedy delivery and a free kitkat!!
Was this review helpful?
Verified customer
Anonymous - 4 years ago
Base plate and covers for wooden posts.
Does what it says excellent product. Despatch note said 1st order pack service booklet with 10% and a chocolate bar neither were in the parcel.
Was this review helpful?
Verified customer
John in Edinburgh - 5 years ago
Decking post fixings
Great fixing for 80mm posts on to a sleeper, worked a treat.
Was this review helpful?
Verified customer
Page 1 of 4
Questions
Anonymous - 2 years ago
CategoryManagement
Hello, This product does not have levelling capabilities. If you are fixing them to an uneven surface, you could possibly pack the lower corners on the underside of the plate inline with the bolt holes and drop the fixings through the holes and washers then tighten down. I hope this helps.
Was this question helpful?
Anonymous - 4 years ago
Layla
Good Afternoon, I hope you are well A 32mm Boring bit will suitable for this I hope this helps Thank you & Take care
Was this question helpful?
Anonymous - 4 years ago
Layla
Good Morning, I hope you are well Please note a 32mm hole saw is to suit this, so should be absolutely fine I hope this helps Take care
Was this question helpful?
Page 1 of 3