About this product
- Replacement multipoint lock for composite and timber doors
- Tested to police approved Secured By Design standard and PAS 24 door set capable
- Lock features 3 hook bolts for high security anti-separation
- Can be cropped when fitting for greater adjustment
- Includes pre-assembled keeps featuring Uni-packer system for uPVC doors or flush fit keeps for timber/composite doors
- Split spindle function for nightlatch operation - means the door cannot be opened from outside without a key
- 10 year guarantee
- 20mm faceplate
- Top Bolt: 385 - 820mm
- Bottom Bolt: 408 - 845mm
- Please note: cylinder must be ordered separately. We recommend the Yale Kitemarked or Mila ranges in our Cylinder section
Specification & Documentation
Bottom Bolt 1 (mm)
408 - 845
Cut to Size
Secured by Design
Top Bolt 1 (mm)
385 - 820
Yale Doormaster PAS24 Pro Replacement Multipoint Door Lock - 3 Hook - 45mm Backset - 92mm c/c
SteveWW - 2 years ago
Exactly what was ordered.
Order placement was easy and delivery next day, even though we placed the order late in the day.
David McCann - 2 years ago
Got there in the end
The lack of full instructions made the job a lot longer than necessary. Instruction covered only replacement of an existing lock, not fitting to a door that had different locks fitted. I had the thing apart numerous times, to rout a bit more timber off the door in several places. However, it's all working smoothly now.
Anonymous - 2 years ago
Good bit of kit
Bought this to replace an existing older unit in a timber lined door; instructions were ok and was easy to cut down to size. I used 32 tpi hacksaw blade.
Anonymous - 2 years ago
Got for new composite door fitted on my new summer house followed instructions as never fitted one before and was quite easy to fit had some adjustments on door frame work but other than that perfect, found a very good self help video on YouTube if IM could do there own it would help much more than the paper instructions as not all scenarios are on paper instructions. really secure item Works perfect..
HarveyP - 4 years ago
Instructions could have been better, product perfectly ok.
We fitted this lock to a brand new door that had been prepared to receive a 3 point lock. The two areas which caught us out were that the channel in the edge of the door doesn't just need to be deep enough for the lock to fit in, but must also be deep enough not to thwart full movement of the rods driving the upper and lower lock, so some deepening of the channel near the top and bottom of the area where the lock sits was necessary, no guidance in the instructions to check this during construction. Similarly the cavities in the door frame need to be a little larger than the chrome plates you are fitting to the door frame, to allow the lock / hooks to move fully into place. Some helpful hints or guidance in the fitting instructions would have been welcome. Initially I had the whole thing built and it appeared to be functioning, but the euro cylinder wouldn't lock and it wasn't until I pulled in a helpful locksmith, that we realized the three point lock wasn't moving to the maximum of it's travel, so the euro cylinder couldn't lock the door.
Page 1 of 1