From Harlow Trade
- Good points
Look good when fitted.
Uniform and all the same.
The small brass nut pulls out of the handle if you try and tighten them, a little spot of pva in the screw hole and around the flat seems to work.
The grain is very heavy, so they need a good sand a fill if your painting them.
On the whole they are good and do the job.
From Guildford Trade
- While the knobs are uniformly turned and look good the bolt fixing (with a 25mm bolt) doesn't allow for a good hard turn to secure it. The threaded nut inside the knob simply pulls out leaving it impossible to secure without glue. I will use the raw oak knobs or the simple screw-on-from-the-back variety in future. Shame.