My basket /  View my basket

Primarily designed for use by door and window frame fitters to pack between fixing points to avoid the frames twisting. However they are a very effective shims for setting levels for joinery and building products. Wedge packer depth size is measured at the thinnest end.

Flat Packer

Slotted Frame Packer

Pack of 100.

Fluted Wooden Dowel in packs or either 100 or 1000

Star Dowel

Corrugated Fastener 5 Corrugation 17 x 25mm

S' Hooks

Twin Horn Cleat

Spring Hook Hardened NP Steel

Tidy / Handy Hooks Green

22mm Consumer Hooks

Steel furniture fitting designed to attach table legs at the corner of the under frame using wood to metal dowel screws and wing nuts. The two leg fixing screws are drilled to suit M8 dowel screws at 35mm centres.

A simple fixing system used for hanging or attaching panels onto sub-frames without visible fixings. The plates hook over both side and bottom fixing brackets, which are screwed to the surrounding sub-frame. Panels can be lifted to remove and gain access to the space behind: 5mm holes and 10 x 5mm adjusting slot.

Steel adjustment bracket with 75mm M8 threaded foot.

A self aligning fully adjustable method of attaching a loose front plinth to a base unit; the adjuster bracket is screwed to the side panel of the base unit. The spring which is secured to the front plinth by a retaining plate is clipped into the adjuster bracket allowing horizontal and vertical adjustment.

Basic keyhole hanging brackets have many applications but are primarily used for quick assembly of shopfitting and general joinery.

This plate and bracket are used to secure a sink top to a base unit. The plate has an M5 threaded hole to be used in conjunction with the adjusting slot of the bracket.

Bracket is cranked to give 16mm clearance to a secondary board or panel.

Cranked steel plate designed to accept a 2mm thick metal or plastic panel.

These two adjustable brackets are used for many applications including shopfitting and furniture manufacture.

There are so many possible uses for these plates from furniture manufacturing to construction applications.

Strengthening ribs on the folded edge gives these plates the edge for loaded applications such as seating, also popular with radiator case manufacturers.

Facia bracket with strengthening rib and locking screw hole after the adjusting slot.

Strong angle bracket sold for many different applications from construction to furniture manufacturers.

Flat connecting fixing plate primarily used in furniture manufacturing.

Slotted hanging plates have many uses in furniture manufacturing and in particular kitchen manufacturing and fitting.